Trades Jobs That Pay Well: 23 Highest-Paying Skilled Trades

The highest-paying skilled trades by national median pay: nuclear power reactor operator, elevator mechanic, powerhouse electrical repairer, power plant operator and lineworker

By

· Dean of Trades, Transportation & Apprenticeship · U.S. Army Veteran ·

Updated

Quick answer: The trades jobs that pay the most, by national median pay from O*NET, are nuclear power reactor operator ($122,890 a year), elevator mechanic ($109,910), powerhouse and substation electrical repairer ($103,020), power plant operator ($102,040) and lineworker ($95,320). The biggest trades, electrician, plumber, HVAC and carpenter, pay a median of about $60,000 to $64,000, have tens of thousands of openings a year, and are much easier to get into.
Top median pay
$122,890 (nuclear operator)
Trades over $90K
5 on this list
Most openings
Electrician (72,700/yr)
Degree needed
None for most

Top 10 highest-paying trades (national median pay)

  1. Nuclear power reactor operator: $122,890 a year
  2. Elevator mechanic: $109,910 a year
  3. Powerhouse and substation electrical repairer: $103,020 a year
  4. Power plant operator: $102,040 a year
  5. Lineworker (lineman): $95,320 a year
  6. Avionics technician: $82,280 a year
  7. Aircraft mechanic (A&P): $79,870 a year
  8. Stationary engineer: $78,620 a year
  9. Boilermaker: $76,410 a year
  10. Control and valve technician: $74,340 a year

Lots of trades pay well, but “well” means different things depending on how hard the trade is to get into, how long the training takes and where you live. Below are 23 skilled trades ranked by national median pay from O*NET (BLS 2025 wage data), with how many openings each one has a year and how most people get in. Every number comes from O*NET, not job ads.

The median is the middle: half of workers earn more. Experienced, union and overtime-heavy workers often earn far more than these numbers.

The highest-paying trades jobs, ranked by median pay

$90,000 and up

#1

Nuclear power reactor operator

$122,890/yr
400 openings a year
On-the-job training plus an NRC license
Hard to get in
#2

Elevator mechanic

$109,910/yr
1,900 openings a year
4–5 year union apprenticeship
Hard to get in
Read the guide →
#3

Powerhouse and substation electrical repairer

$103,020/yr
1,800 openings a year
Utility apprenticeship or electrical training
Fast growing
#4

Power plant operator

$102,040/yr
2,300 openings a year
Long on-the-job training at a utility
Hard to get in
#5

Lineworker (lineman)

$95,320/yr
10,900 openings a year
3–4 year line apprenticeship, CDL
Hard to get inFast growing
Read the guide →

$70,000 to $90,000

$60,000 to $70,000

Tap a trade to read its full guide. Openings a year are O*NET projections for 2025–2035 and include openings from growth and from workers retiring or changing jobs.

Trades that pay $100,000 or more

Four trades on this list have a national median above $100,000: nuclear power reactor operator, elevator mechanic, powerhouse and substation electrical repairer, and power plant operator. All four are small trades with few openings and long training, and most are tied to utilities or one specialized union.

Many more tradespeople pass $100,000 with experience. The top 10% of electricians, plumbers, lineworkers and ironworkers earn well over $100,000, especially with overtime, union scale in high-cost areas, or their own business.

Pay depends on your state

The same trade can pay very differently from state to state. For example, the median electrician in Washington earns about $95,220 a year, and the median ironworker there earns about $107,660, far above the national medians. Union membership, cost of living and local demand all play a part. See your state’s numbers in our State Career Guides.

High pay vs. how hard it is to get in

  • Hardest to get into: elevator mechanic, lineworker, nuclear and power plant jobs. Few openings, competitive apprenticeships or utility hiring, and long training.
  • Best balance of pay and openings: electrician, plumber, HVAC, sheet metal and diesel. Solid pay and thousands of openings a year.
  • Fastest paths to good pay: HVAC, diesel and fiber optics, where a short program can get you working in months. See our easiest trades to learn that pay well.

How to get into a high-paying trade

  1. Finish high school or get your GED, with as much math as you can.
  2. Pick two or three trades from the list that fit how you like to work: outdoors or indoors, heights, travel, shift work.
  3. Practice for the entrance test. Many apprenticeships give a math or mechanical aptitude test. Try our free mechanical aptitude test, electrical aptitude test and elevator (EIAT) practice test.
  4. Apply when apprenticeships open. Many open only once or twice a year. Our free state trackers show what’s open now.
  5. Consider a short program first if you need a faster start or want to stand out on applications.

High-paying apprenticeships taking applications now

These update automatically from our free state trackers, which we check every week. Dates and requirements change, so confirm on the program’s site before you apply.

269 high-paying trade apprenticeships are open, opening soon or taking applications year-round across our state trackers. Pick your state: · Arkansas · California · Hawaii · Idaho · Illinois · Indiana · Michigan · Minnesota · New Jersey · New York · Ohio · Oregon · Pennsylvania · Texas · Washington

Trades jobs hiring now

Recent trades jobs from our job board.

HVAC/R technician
Zoetis
Kalamazoo, Michigan
Posted 2 hours ago
Electrician
Marathon Petroleum Corporation
Detroit, Michigan
Posted 2 hours ago
HVAC Service Technician
Friedman Management Company
Farmington Hills, Michigan
Posted 1 day ago
Electrician
Voltava
Auburn Hills, Michigan
Posted 1 day ago
See all trades jobs (48) →

Dean’s take

If pay were the only factor:

“If you were only looking at pay, I would say elevator mechanic or lineman. The problem is that those are two really difficult careers to get into, and you may not like them.”

Lester Burkes, Dean of Trades, Transportation and Apprenticeship

Trades jobs that pay well FAQ

What trade gets paid the most?

By national median pay, nuclear power reactor operators ($122,890) and elevator mechanics ($109,910) top the list, according to O*NET.

What is the easiest trade that pays well?

HVAC, diesel and fiber optics are some of the quickest to start, often with a program of a few months to two years. See our easiest trades guide.

What job pays $400,000 a year without a degree?

No skilled trade has a median anywhere near that. The people who earn that much in the trades are usually business owners with crews working for them. A realistic goal is $60,000 to $100,000+ as a journey-level worker, and more if you build your own business.

What is the fastest growing trade?

Wind turbine technicians and powerhouse electrical repairers are projected to grow much faster than average, and electricians and HVAC technicians have the most openings each year.

Do you need a degree for a high-paying trade?

No. Most of the trades on this list are learned through paid apprenticeships or short technical programs.

Get new apprenticeship openings by email

We’ll email you when high-paying trade apprenticeships open. Free, and you can unsubscribe anytime.

We are not affiliated with any program or employer listed. Dates and requirements change; always confirm on the program’s own website before you apply.

Sources: O*NET OnLine national median wages (BLS 2025 wage data) and 2025–2035 projections, including 51-8011.00, 47-4021.00, 49-2095.00, 51-8013.00, 49-9051.00, 49-2091.00, 49-3011.00, 51-8021.00, 47-2011.00, 49-9012.00, 49-9052.00, 47-2072.00, 49-9044.00, 49-9081.00, 49-2022.00, 47-2152.00, 47-2111.00, 47-2221.00, 47-2021.00, 47-2211.00, 49-3031.00, 49-9021.00, 47-2031.00

Lester Burkes

About the author

Lester Burkes

Lester is the Dean of Trades, Transportation and Apprenticeship at Clover Park Technical College in Lakewood, Washington, where he oversees nine trades programs and two apprenticeships. He’s a U.S. Army veteran and former Army diesel mechanic, taught Diesel and Heavy Equipment Technology at Bates Technical College from 2016 to 2021, and founded CPTC’s Eastside Training Center, growing it from 3 students to more than 400. He holds a Master of Education from the University of Washington Tacoma.

More about Lester → · Views expressed here are his own.

Comments

Leave a Reply