How to Become a CNC Machinist: Training, Apprenticeship and Salary

How to become a CNC machinist

By

· Dean of Trades, Transportation & Apprenticeship · U.S. Army Veteran ·

Updated

Quick answer: Most CNC machinists start with a high school diploma or GED, then take a machining certificate at a community or technical college or get hired as a CNC operator and learn on the job. Many move up through a machinist apprenticeship. O*NET says most machinists need one to two years of on-the-job training. Median pay for machinists is $28.24 an hour ($58,750 a year).
Training
1–4 years
Median pay
$28.24/hr ($58,750/yr)
Education
Diploma or GED, often a certificate
Openings a year
About 26,100

CNC machinists use computer-controlled mills, lathes and other machines to cut metal and plastic into precise parts, from engine and aircraft parts to medical implants. They read blueprints, set up the machine and tools, load or tweak the program, run the first part, measure it to the thousandth of an inch, and adjust until it’s right. Job titles include CNC machinist, CNC operator, CNC machine operator, CNC lathe or mill operator, setup machinist, and CNC programmer.

This guide covers how to become a CNC machinist step by step, CNC machinist training and certificate programs, apprenticeships, how long it takes, CNC machinist salary, and CNC apprenticeships and jobs that are open right now.

How to become a CNC machinist, step by step

  1. Finish high school or get your GED. Shop math (fractions, decimals, basic geometry and trig) matters most. Shop classes and CAD help too.
  2. Learn the basics. Take a machining or CNC certificate program at a community or technical college, or start as a CNC operator, where you load parts and run programs someone else set up.
  3. Learn to read blueprints and measure. Calipers, micrometers and reading prints are daily skills. You’ll also learn speeds and feeds and how cutting tools work.
  4. Get into a machinist apprenticeship or a training-minded shop. Apprenticeships pay you while you learn and lead to a recognized credential.
  5. Learn setup and programming. Moving from operator to setup machinist to programmer (G-code and CAM software) is how pay goes up.
  6. Add credentials. National Institute for Metalworking Skills (NIMS) credentials are the best-known in machining and can help you get hired or promoted.

CNC machinist training, certificate programs and apprenticeships

There are three common ways in:

  • A CNC machinist certificate program. Community and technical colleges offer machining and CNC certificates and two-year degrees with hands-on lab time on real machines. Search “CNC machine training schools near me” or ask your local American Job Center, which can sometimes help pay for training.
  • Start as a CNC operator. O*NET says CNC tool operators usually need a few days to a year of on-the-job training. Plenty of machinists started by running parts on second shift and asking to learn setups.
  • A CNC machinist apprenticeship. Manufacturers and training centers run registered apprenticeships for machinists, CNC machinists and tool and die makers. You work full time, take classes, and get raises as you master new skills. They often take about four years.

Machining isn’t licensed by states. What employers look at is what you can do on the machine, plus credentials like NIMS and any apprenticeship certificate.

How long does it take to become a CNC machinist?

You can start as a CNC operator within weeks. O*NET says most machinists need one to two years of on-the-job training, often on top of some school; about a third of machinists say a post-secondary certificate is needed for new hires. A full apprenticeship usually takes about four years, and you’re paid the whole time.

CNC machinist salary: how much do CNC machinists make?

O*NET lists the national median pay for machinists at $28.24 an hour, or $58,750 a year (2025 data). CNC tool operators, who mostly run machines rather than set them up, have a median of $24.37 an hour ($50,690 a year). Pay goes up as you learn setups, multi-axis work and programming, and with overtime.

About 288,300 people work as machinists and 170,000 as CNC tool operators. O*NET projects slower-than-average growth for machinists, with about 26,100 openings a year from 2025 to 2035, most from people retiring or changing jobs. CNC operator jobs are projected to decline slightly but still have about 12,500 openings a year.

CNC machinist apprenticeships taking applications now

These update automatically from our free state trackers, which we check every week. Dates and requirements change, so confirm on the program’s site before you apply.

Open nowRogue Industrial Manufacturing JATC
Oregon · Southern Oregon (White City)
Not listed
More Oregon programs
Open nowSacramento Valley Manufacturing Alliance
California · Sacramento area
Non-union
More California programs
Opening soonIAM/Boeing Apprenticeship
Washington · Auburn / Puget Sound
Union (IAM 751)
More Washington programs
Applications year-roundApprenticeNYC: Advanced Manufacturing (NYC SBS)
New York · New York City
Non-union
More New York programs

4 CNC and machinist apprenticeships are open, opening soon or taking applications year-round across our state trackers. Pick your state: California · New York · Oregon · Washington

CNC machinist jobs hiring now

Entry-level and experienced CNC and machinist jobs from our free job board, updated every morning.

No CNC machinist jobs are posted on our board right this minute. New entry-level and apprentice jobs are added every morning.
Browse trades jobs hiring now →

What does a CNC machinist do?

  • Read blueprints and work orders
  • Set up machines: fixtures, vises, cutting tools and work offsets
  • Load, check and edit CNC programs
  • Run first parts and measure them with calipers, micrometers and gauges
  • Adjust tool wear and offsets to keep parts in tolerance
  • Keep machines clean and maintained

Most machinists work in shops and plants, often on day, second or third shift. In O*NET’s survey, 94% of machinists wear safety gear every day, 89% spend most of the day using their hands on tools and controls, and 62% spend most of the day standing.

Dean’s take

“CNC sits right at the intersection of AI, robotics and people. It’s not a field where a fully automated process will ever be completely trusted, so CNC operators will be more and more in demand, not only for their programming skills but to make sure the quality is there in the finished product.”

Lester Burkes, Dean of Trades, Transportation and Apprenticeship

CNC machinist FAQ

Is becoming a CNC machinist hard?

It’s learnable. You need solid shop math, attention to detail and patience. Running a machine is quick to learn; setting up and programming takes a few years of practice.

Is CNC machining well paid?

The national median for machinists is $58,750 a year. Setup machinists, multi-axis specialists and programmers usually earn more than operators, and overtime is common in busy shops.

Do you need a certificate to be a CNC machinist?

Not by law. Many shops hire operators with no certificate and train them. A certificate program or NIMS credentials can help you get hired faster and start at a higher level.

What’s the difference between a CNC operator and a CNC machinist?

An operator mainly loads parts, runs proven programs and checks parts. A machinist also sets up jobs, edits programs and solves problems. Many machinists start as operators.

How long does it take to be a CNC machinist?

You can start running machines in a few weeks. Expect one to two years on the job before you set up and run jobs on your own, and about four years to finish a full apprenticeship.

Can I learn CNC machining online?

You can learn blueprint reading, shop math and G-code basics online. But setups and measuring are hands-on skills, so pair online learning with a lab class, an apprenticeship or an operator job.

Get new CNC and machinist openings by email

We’ll email you when machinist and other trade programs open in the states we track. Free, and you can unsubscribe anytime.

← Back

Thank you for your response. ✨

You’re in. Watch your inbox for new openings.

We are not affiliated with any program or employer listed. Dates and requirements change; always confirm on the program’s own website before you apply.

Sources: O*NET: Machinists · O*NET: Computer Numerically Controlled Tool Operators · National Institute for Metalworking Skills

Lester Burkes

About the author

Lester Burkes

Lester is the Dean of Trades, Transportation and Apprenticeship at Clover Park Technical College in Lakewood, Washington, where he oversees nine trades programs and two apprenticeships. He’s a U.S. Army veteran and former Army diesel mechanic, taught Diesel and Heavy Equipment Technology at Bates Technical College from 2016 to 2021, and founded CPTC’s Eastside Training Center, growing it from 3 students to more than 400. He holds a Master of Education from the University of Washington Tacoma.

More about Lester → · Views expressed here are his own.

Comments

2 responses to “How to Become a CNC Machinist: Training, Apprenticeship and Salary”

  1. […] (Learn how to become a CNC Machinist) […]